|
General information pertaining to
safe practices and accepted standards |
| |
| Push button
colours according to standard |
| |
EN60073 /
VDE
0199 DIN EN60073
VDE
0113-1 Table 2
Ref:
Moeller wiring manual |
|
|
|
| Emergency - Emergency switching off;
Firefighting |
RED |
|
|
|
| Abnormal condition- Intervention, to
suppress abnormal condition to avoid unwanted changes |
Yellow |
|
|
|
| Enforced action - Resetting function |
Blue |
|
|
|
| Ready, safe to start |
Green |
|
|
|
| No function assigned |
White, |
|
|
|
| No function assigned |
Grey |
|
|
|
| No function assigned |
Black |
|
|
|
| |
|
|
|
|
|
|
t
|
| Indicator light
colours according to standard
|
| |
EN60073 / VDE
0199 DIN EN60073
VDE
0113-1 Table 2
Ref:
Moeller wiring manual |
|
|
|
Warning of potential danger or a situation
which requires immediate
action e.g.
Failure of pressure in the
lubricating system
•
Temperature outside
specified (safe) limits
•
Essential equipment stopped
by action of a protective
device |
RED |
|
|
|
Abnormal
condition Impending critical
condition- e.g.
•
Temperature
(or pressure) different from
normal level
•
Overload, which is
permissible for a limited time |
Yellow |
|
|
|
| Enforced action - Operator
action essential - e,g,
•
Remove obstacle
• Switch over to
Advance |
Blue |
|
|
|
| Normal - Ready to start or safe / normal
operating conditions prevailing e..g.
•
Machine ready to be started
• Mode
/ control x running normally |
Green |
|
|
|
|
No function assigned |
White, |
|
|
|
| No function assigned |
Grey |
|
|
|
| No function assigned |
Black |
|
|
|
| |
|
|
|
|
|
|
t
|
| |
|
|
Safety systems
according to standards
| |
|
|
|
|
|
B10d: Number of operations until 10 % of the tested
components fail dangerously.
|
EN ISO 13849-1 |
|
|
|
| B10:
Number of operations until 10 % of the tested components fail. |
|
|
|
|
| MTTFd: Mean
Time To Dangerous Failure.
Average of the time expected
up to a dangerous failure |
EN ISO 13849-1 |
|
|
|
| PL :
Performance Level |
EN ISO 13849-1 |
|
|
|
| PFHd:
Probability of a Dangerous Failure per Hour
Probability of a dangerous failure per hour |
|
IEC 62061 |
|
|
| SIL CL:
Safety Integrity Level Claim Limit.
SIL claim limit (for a subsystem).
|
|
IEC 62061 |
|
|
|
|
|
|
|
|
|
